Dimensions; Trouble-Shooting - Samoa 366760 Guía De Servicio Técnico Y Recambio

Problem
LCD: no indication.
Not enough measure-
ment precision.
Reduced or zero flow
rate.
The meter does not
count, but the flow rate
is correct.
Samoa Industrial, S.A. · Box 103 Alto Pumarín · 33211 Gijón - Asturias Spain · Tel.: +34 985 381 488 · Fax.: + 34 985 384 163

Dimensions

Trouble-shooting

Possible cause
Bad battery contact.
Wrong K FACTOR.
The meter works below.
minimum acceptable flow rate.
TURBINE blocked.
Incorrect installation of
gears after cleaning.
Possible electronic card
problems.
Remedial Action
Check battery contacts.
With reference to paragraph H,
check the K FACTOR.
Increase the flow rate until an
acceptable flow rate range has
been achieved.
Clean the TURBINE.
Repeat the reassembly pro-
cedure.
Contact your dealer.
R. 10/12 836 828
17