Power On/Off; Bluetooth Pairing - Monster SUPERSTAR S110 Guia De Inicio Rapido

Power/Charging
Before using the speaker, you need to charge the battery and pair the speaker with a
compatible device.
The package includes a Micro USB charging cable that can be connected to your computer
or other device made for USB charging. You can use a standard USB compatible charging
device, or you can plug the USB cable directly into a laptop or PC.
Caution: ONLY use computer USB output or standard 5 volt only (500mA minimum) power
adaptor for charging.
Damage may occur if non-standard USB power adaptor is used for charging. Do not charge
if connector and/or device is wet or damaged.

Power On/Off

In power off mode, press and hold the Power On/Off Button for about 2 seconds to power
on the speaker, you hear the opening tone.
To power off the speaker, press and hold the Power On/Off Button for about 2 seconds
again, you will hear a shutdown tone.
Caution: If no Bluetooth device is connected, the speaker will be turned off within about 5
minutes.

Bluetooth Pairing

•When you unbox the speaker and power it on for the first time, it will enter to pairing mode
automatically.
•If Bluetooth device is connected, press and hold the MFB for about 2 seconds, disconnect
and ready to pair another device.
•If speaker does not connect any Bluetooth device, it will enter to pairing mode
automatically.
During pairing, activate Bluetooth on your phone and set it to search for new Monster device
for pairing. When the speaker is connected successfully, connected tone will be heard and