Normal Mode; Learning Mode - Polk Audio SurroundBar One-Step Manual Del Usuario

1
EASY HOOKUPS AND SIMPLE CONTROLS
1 LED—A light that shines green, orange or red
to indicate operating status.
2 Power—Turns on the SurroundBar
it in standby mode.
3 Mute—Mutes the sound coming from the SurroundBar
One-Step and Wireless Subwoofer.
4 Volume Up and Down—Adjusts the volume
of the SurroundBar One-Step and Wireless Subwoofer.
5 Remote—Puts the SurroundBar One-Step into "learning
mode" so you can program it to respond to commands
from your remote control.
6 Channel ID Switch—Selects the "channel" for the Wireless
Subwoofer signal. Don't forget to select the same
"channel" on the Wireless Subwoofer itself.
7 Gain Level Switch—Adjusts the input sensitivity
of the SurroundBar One-Step (see page 9).
8 Audio Inputs—Where you connect your TV (or other source)
to the SurroundBar One-Step. Use the 5' analog L/R audio
cable provided.
9 Power Connection—The SurroundBar One-Step power
supply connects here.
10 Power Switch—Turns the SurroundBar One-Step on or off,
but you can leave it on all the time.
4 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
2 3 4 5
MUTE REMOTE
CHANNEL ID
1 2 3 4
6
® One-Step ™ or puts
R
24V......
2.7A
GAIN LEVEL
L
INPUT
1 2 3
7 8 9
SurroundBar One-Step LED

NORMAL MODE:

Green Steady—Power is on; all is well.
Red Steady—Power is on but no audio signal detected.
Green Two Blinks—A remote control signal
is received successfully.
Green Slow Blinking—System muted.
Green Fast Blinking (After pressing volume up
button)—You have reached the maximum volume.
Green Fast Blinking (At power up)—SurroundBar
One-Step and Wireless Subwoofer have established
a wireless connection.
Orange Fast Blinking (At power up)—SurroundBar
One-Step and Wireless Subwoofer have failed to establish
a wireless connection.
LEARNING MODE: (See page 9 for instructions.)
Orange Blinking—The SurroundBar One-Step
is in learning mode.
Orange Steady—The SurroundBar One-Step is in learning
mode and a SurroundBar One-Step button has been selected.
Green Blinking—The SurroundBar One-Step has successfully
learned a remote control command.
Red Blinking—The SurroundBar One-Step has failed to learn
a remote control command.
Red and Orange Blinking—Learned IR codes have
been successfully erased.
POWER
10