Working Advice - Bosch WEU UniversalInspect Manual Original

OBJ_BUCH-3040-001.book Page 24 Monday, February 6, 2017 8:23 AM
24 | English
Press the 6 button repeatedly until the desired brightness level has been reached or
the black and white contrast has been set.
Note: The set brightness is 100 % for black and white contrast.
 Do not stare into the illumination light 11 and do not direct it at other persons.
The brightness of the light can blind the eyes.
To reduce the brightness and to switch off the camera illumination light 11, press but-
ton 6 repeatedly until the required brightness is reached or the illumination light is
switched off.
Magnifying the Image on the Display (Zoom)
Pressing the 5 button magnifies the image on the display by a factor of 1.5 or 2.
Rotating the Image on the Display
The 3 button rotates the image on the display through 180°.
Transferring images
It is possible to transfer images by inserting a micro SD card 19 in FAT32 format.
When the formatted micro SD card 19 is inserted, all images are automatically trans-
ferred from the local memory to the micro SD card 19 and deleted from the local
memory.
Inserting the Micro SD Card
Only use micro SD cards between 4 GB and 32 GB which support FAT32 format.
If necessary, format the micro SD card 19 in FAT32 format before inserting it.
Insert the formatted micro SD card 19 all the way into the slot 18.

Working Advice

Check the area that you want to inspect and pay particular attention to obstructions
or hazard areas.
Bend the camera cable 8 in such a manner that the camera head can be easily inserted
into the area subject to the inspection. Carefully guide the camera cable in.
Adjust the brightness of the camera illumination light 11 so that the image is easily
recognisable. When photographing highly reflective objects, for example, you can
achieve better results in lower light or using black and white contrast.
When objects to be inspected are represented unsharp, reduce or increase the dis-
tance between camera head 10 and object.
1 609 92A 3HR | (6.2.17) Bosch Power Tools