Storage; Troubleshooting - Steinbach Poolrunner Battery+ Manual Del Usuario

2. Take the filter unit
part .
4
3. Thoroughly rinse the filter unit
plain tap water.
4. Rinse the device after each use with
plain tap water inside and out.
The device is clean.

Storage

1. Thoroughly clean the device (see section "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required after at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C)
without direct sunlight.

Troubleshooting

Fault description
The device cannot be switched
on and the status indicator is
not lit.
The charge control indicator is
not lit.
The device does not work and
the status indicator blinks red.
42
out of the bottom
3
with
3
Cause
The rechargeable battery is
drained.
The rechargeable battery is
defective.
The charger is defective.
The device has a fault.
16
3
4
17
3
Remedy
Charge the rechargeable
battery.
Contact customer service.
Contact customer service.
Contact customer service.