Puma Go Manual De Usuario página 6

Timer setting mode:
Press and hold S4 until Hour starts blinking from Timer mode to
Timer setting mode. Press S1 to advance the setting, Press and Hold
S1 for fast setting. Press S2 to set the next digit. The sequence in
Timer setting mode is Hour—Minute—cD-S/cD-r/cD-U.
S3/S4
Press &
Hold S4
Hour
3 sec
Press S4 or S3 to exit the setting mode. If there is no operation for 2
to 3 minutes, the watch will return to Timer mode automatically.
Alarm mode:
Press S3 shortly from Timer mode to Alarm mode. There are 2 daily
alarms which are working independently. It is presented by Alarm
number, Hours, Minutes, and Alarm status.
Press S2 in Alarm mode to select AL-1 to AL-2
Alarm mode
2-3 sec
10
S3/S4
Minute CD-S/CD-U/CD-R
S2 S2
S2
Alarm 1 Alarm 2
S2
S2
Press S1 in Alarm mode to arm or disarm the alarm or chime of the
selected alarm. Below is the sequence of display after pressing S1.
Alarm ON & Chime ON
S3/S4
The alarm sounds daily for 20 seconds at alarm time when the
alarm is set to oN. Press any key to stop the alarm sound. If any
alarm is active, alarm mark is also on. If chime is oN, there is an
hourly chime. Pressing any button will have a beep sound whether
the chime is oN or off.
Alarm Setting mode:
Press and hold S4 in alarm mode to enter alarm setting mode.
The hour digit starts flashing at 1 hertz. The alarm is turn "oN"
automatically. Press S1 to advance the setting by 1. Press and hold
S1 for fast setting. Press S2 to set the next digit. The sequence for
setting is Hour—Minute—T1/T2.
Alarm ON & Chime ON
Press S3/S4 to exit setting mode. If there is no key operation for 2 to
3 minutes, watch will exit setting mode automatically.
Water Resistance:
This watch is water resistant up to 5 ATM
Alarm OFF & Chime OFF Chime OFF Alarm ON
S1 S1
Hour Minute
Press &
Hold S4
S2
3 sec
S3/S4 S3/S4
Alarm OFF Chime ON
S1
S1
T1/T2
S2 S2
S3/S4
11