Puma Go Manual De Usuario página 5

Timer Mode:
Press S3 shortly from chrono Data mode to Timer mode. The timer
has a 1 second resolution and working range of 1 second to 24
Hours. The watch will give out 5 beeps at 5 minutes, 2 beeps at 2
minutes and 1 beep at 1 minute before the timer counts down to
zero. The watch will beep for 10 second when the timer counts down
to zero. There are 3 kinds of countdown process; cd-S = countdown
Stop, cd-U = count Down Up, cd-r = count Down repeat. These
options can be selected in Timer setting mode.
Count Down Stop- Press S1 to start Timer, S2 to stop. Pressing S4
while the timer is
stopped will return to Timer mode.
When the preset value counts down to zero, beep sound for 10
seconds or press any key to cancel timer alarm. It will auto return to
preset timer screen. While the timer is running, you can check what
kind of timer is set whether cd-S, cd-U, or cd-r by pressing S4.
Timer mode reset
2-3 sec
S4
S1
Stop Start
S2
S1
Press S4
8
beep sound
for 10 seconds
counts down
Release S4
Release S4
Continue press S4
counts down
Count Down Up: Press S1 to start Timer, S2 to stop. Pressing S4
while the timer is stopped will return to Timer mode. When the
preset value counts down to zero, beep sound for 10 seconds then it
will auto count up to 99:59'59 hours and beep sounds for 10 seconds
then go back to reset view.
Stop
S4
S2 S1
reset Start
counts down
S1
Count Down Repeat: Press S1 to start Timer, S2 to stop. Pressing
S4 while the timer is stopped will return to Timer mode. When the
preset value counts down to zero, beep sound for 10 seconds then
it will auto restart to preset timer. This loop will continue until the
timer is stopped by pressing S2. The maximum countdown repeat
loops are 30 loops and auto stop.
reset Start
counts down
S1
S2 S1
S4 Stop
reset
beep sound count up
count up
beep
sound for
10 seconds
Auto restart loop
counts down
repeat
9