Puma Go Manual De Usuario página 4

Chrono Mode:
Press S3 shortly from Time mode to chrono mode. Default is
00'00"00. The resolution is 1/100 second for the first hour and
1 second for the rest. Working range for chrono is 99 hours 59
minutes 59.99 seconds and stop automatically.
The watch is also capable of storing 10 laps memory. This includes
the first 9 laps and the last lap.
Button S1 is used for "Start/Lap" operation and button S2 for "stop/
reset" operation.
Lap will be displayed for 4-5 seconds when "Lap" and "Split" is
taken, and then the split time is displayed for also 4-5 seconds.
Press Button S4 for fast escape.
If lap counter is larger than 9, it will not be displayed. The watch
will display "LAP -" and "SPL -". Data will not be stored in memory
except the last lap. All Data stored in memory will be cleared when
the chronograph is reset.
Chrono mode
2-3 sec
Reset Start LAP
Start
S1 S1
S2 S1 S2
Stop
S2
Clear all memory and reset
6
S1 S1
Spilt Run
4 Sec Or 4 Sec Or
Press Press
S1
S4 S4
Stop S2 Stop S2 S1
Stop
S2
Data mode:
Press S3 shortly from chrono mode to Data mode. The watch will
display LAP1 after 2-3 seconds if there is data available. If there is
no data, it will display "- - - -".
Press button S1 to scan the data in sequence from Lap1 to Lap 9
and the last lap.
Press S4 to toggle the display for Lap or Split Time. If there is no key
operation, the lap and split time is displayed in 4 seconds interval
automatically. Press S2 to change back to chrono mode.
Date mode
no date
2-3 sec
LAP
LAP Spilt
4 Sec Or
Have data
Press S4
2-3 sec
4 Sec Or
Press S4
S1
LAP Spilt
4 Sec Or
Press S4
4 Sec Or
Press S4
S1
LAP Spilt
4 Sec Or
S1
Press S4
4 Sec Or
Press S4
S2
7