Puma Go Manual De Usuario página 3

ENGLISH
PUMA GO User Manual
This watch features 5 modes of operation: Normal time,
chronograph, Data, Timer, and Alarm. Press S3 to toggle to different
modes. This watch also features an EL back light which will light up
for 3 seconds after pressing S4.
S3 (MODE)
S2 (STOP/EL)
S4 (SET/EL)
General Operations
All modes:
The watch has the following modes of operation: Time, chronograph,
Data, Timer, and Alarm modes. Press S3 to scroll through thee
modes.
S3 S3
Time Mode:
Press S3 from Alarm mode to Time mode. The watch is equipped
with a dual time feature which counts up individually with the same
seconds. 12/24 hour format can also be selected. If 12H format is
selected, PM will be shown.
To change from Time 1 to Time 2, press and hold S2 for 2 to 3
seconds until T1 or T2 icon stops blinking.
4
S1 (START/LAP/+)
S3 S3
S2 Hold S2
SEC
Release S2
Year range: 2000-2099
Dual time (T1 & T2) also presents Hour, Minute, Second, Date and
weekday.
Time Setting:
To set the time, year, month, date and etc., press and hold S4 until
the second digit start to blink. Press S1 to reset the second's digit to
"00". There is +/- 30 seconds adjustment for both T1 and T2.
Press S2 to select next digit for setting. Press S1 to advance the
setting, Press and Hold S1 for fast setting. Press S4 or S3 to exit the
setting mode. If there is no operation for 2 to 3 minutes, the watch
will return to Time mode automatically.
The sequence of time setting is Seconds—Hour—Minute—
Weekday—Year—Month— Day—12H/24H.
Second
S3/S4 S2
press &
hold S4
S2
3 sec
12/14H
S2
(Shortcut) In Time mode except for Time setting, press S1 to switch
to timer mode automatically
S2 Hold S2
2 SEC
Release S2
Hour Minute Weekday
S2 S2
Date Month
S2 S2
S2
Year
5