Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CT10MultiLangInside.R1
7/3/00
TROUBLESHOOTING
THE REMOTE DOES NOT RING
Make sure that the Ringer
is "On".
17
Ensure that the Telephone Cord
30
are installed correctly.
Recharge the Remote Battery
by firmly placing it in the
18
Remote Charging Well
.
24
Disconnect the AC Adapter from the power source and
reconnect it in a known good outlet.
Use the Remote
in an area closer to the Base
3
I CANNOT HEAR A DIAL TONE
Make sure your Remote Rechargeable Battery
ly seated in the Charging Well
24
The Battery may need to be charged for 8 hours prior to
first use.
Check that all cords are correctly connected and firmly in
place.
Adjust the Dual Function Receive Volume Control Key
up to increase the volume.
Make sure the Remote is within range of the Base.
Separate and then reconnect the Rechargeable Battery
and Remote
.
3
Return the Remote to the Charging Well
to re-establish a communication link.
2:21 PM
Page 14
and the AC Adapter
28
A
E
G
.
19
is secure-
18
E
and/or fully charged.
A
15
G
18
C
for 5 seconds
24
E
14
TROUBLESHOOTING
MY REMOTE STOPPED WORKING
Separate and then reconnect the Rechargeable Battery
Remote
.
3
Remove and replace the AC power cord from the Base
Return the Remote to the Charging Well
24
establish a communication link.
CALLER CANNOT HEAR MY VOICE
Make sure the Mute Button
is off.
5
Change Channels using the Channel Button
I HEAR A BUZZ OR HUM
Try locating your Base in different positions and make sure no
objects obstruct the Remote or Base.
Locate the Remote and Base away from electronic equipment or
other radio-frequency devices.
Change Channels using the Channel Button
I CAN HEAR OTHER CORDLESS DEVICE USERS
Press the Channel Button
until you get a clear signal.
8
Use the Remote
closer to the Base
.
3
19
15
and
18
C
.
19
A
for 5 seconds to re-
E
G
.
8
.
8
Tabla de contenido
