CT10MultiLangInside.R1
7/3/00
SPECIAL BUTTONS
MUTE
The Mute Button
stops the voice transmission to the receiving party.
5
When activated, the red LED
is "On." Press the Mute Button again to
4
deactivate the mute function.
REDIAL
The Redial Button
redials the last number dialled. To use, press the
7
Talk/Hang-up Button
. When a dial tone is heard, press the Redial
11
Button.
The last number entered will be dialled just as you would have redialled it
manually.
CHANNEL
Your cordless headset telephone has an auto scan feature that
automatically selects a clear channel when you press the Talk/Hangup
Button
. If you experience interference during a call, press the Channel
11
Button
to switch to another channel until you have good reception.
8
FLASH
Use the Flash Button
to access services such as call waiting, etc.
12
MEM (MEMORY)
The CT10 speed dial memory can store up to 10 phone numbers,
containing a maximum of 16 digits. The 0 through 9 buttons on the
keypad recall and dial the phone numbers stored in memory.
2:21 PM
Page 10
G
G
G
G
G
10
SPECIAL BUTTONS
MEM (MEMORY)
TO STORE NUMBERS
The In-Use Indicator Light
should be off. If it is not off, press the
22
Talk/Hang Up Button
once to shut it off.
11
Press the Mem Button
followed by the numbers you want to store.
13
Press the Mem Button
followed by the one digit number (0-9) on the
13
Telephone Keypad that you want to assign for that number.
You can repeat the process for storing numbers until the 10 single
numbers on the keypad are used up.
TO CHANGE STORED NUMBERS
To change a number stored in memory, simply store a new number in
that memory location.
TO DIAL STORED NUMBERS
Press the Talk/Hang Up Button
. The In-Use Indicators
11
light up.
When the dial tone is heard, press the MEM Button
desired single digit (0-9) memory location button.
The stored number you have selected will be automatically dialed.
TO DIAL A STORED NUMBER DURING A CALL
The memory/recall function also works when additional numbers are
required during the call such as a numeric password. At the
appropriate time during the call press Mem
13
rapidly transmit the stored numbers.
11
G
G
and
will
22
10
G
, then press the
13
G
and the assigned key to