D-Link DCS-5350L Guía De Instalación Rápida página 6

TrOUBlESHOOTING
SeTUP anD COnFigUraTiOn PrOBlemS
1. HOW DO I CONNECT my CAmErA USING WPS?
We recommend that you use either the Zero Configuration or mydlink Home method described
earlier in this guide as they will configure your camera for your wireless network.
If you wish to use WPS to connect your camera, follow these steps:
• Press and hold the WPS button on the back of the camera for 5 seconds. The blue WPS status
LED will blink.
• Press the WPS button on your wireless router or access point within 60 seconds. On some
routers, you may need to log into the web interface and then click an onscreen button to activate
the WPS feature. If you are not sure where the WPS button is on your router or access point,
please refer to your router's user manual.
2. THE ImAGE IS OUT OF FOCUS.
You can turn the focus ring on the front of the camera to adjust the focus.
3. WHy IS THE CAmErA VIEW HAZy Or BrIGHT WHEN USING NIGHT VISION mODE?
The IR night vision lights on the camera may be reflecting off of a nearby surface or window. Try
repositioning your camera to avoid reflections or glare.
6
DCS-5350l