Technical Data; Declaration Of Conformity - METREL MD 1050 Manual Del Usuario

7 Technical data:

Indication:
Voltage range:
Frequency range:
Display Indication:
Test current
Operation duration:
Continuity test:
Type of Protection:
Overload class:
Test standard:
Power supply:

8 Declaration of conformity

This product fulfils the specifications contained in the Low Voltage Directive 2006/95/EC
and EMC Directive 2004/108/EC. For full compliance with GS38, the instrument should
be used in conjuction with the GS38 probe tip covers
Fields of application
The tool is intended for use in applications as described in the operating instructions
only.
Any other form of usage is not permitted and can lead to accidents or destruction of the
device. Any misuse will result in the expiry of all guarantee and warranty claims on the
part of the operator against the manufacturer.
In case of uncertainties in the operation and handling, please contact our support team:
[email protected]
This manual has been prepared with great care. For the correctness and completeness
of data, pictures and drawings, no responsibility is accepted. Subject to change.
13 LED-s for voltages (12, 24, 48, 120, 230, 400, 690
and 1000 V), Polarity (+~-),
Continuity (Rx/) and phase/rotating field (R/L) +
PELV
6...1000V AC/DC
0...400Hz
0,85 Un
: Is <0,3A\ In< 3,5mA
30s on \ 240s off
0...500k
IP65
CAT IV 1000V
IEC/EN 61243-3, DIN VDE 0682-401
2x 1,5V Typ AAA Micro
12
MD 1050-LED