Environmental Information - McCulloch Orkan 2200 Manual De Instrucciones

Husqvarna Outdoor Products are manufactured
under an Environmental Management System
(ISO 14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the potential for recycling
at the end of the products' life.
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.
If any part is found to be defective due to faulty
manufacture within two years of original
purchase, Husqvarna Outdoor Products, through
its Authorised Service Repairers will effect the
repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the
Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair
wear and tear.
(e) The machine has not been serviced or
repaired, taken apart or tampered with by
any person not authorised by Husqvarna
Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original
purchaser.
(h) The machine has not been used outside of
the country for which it was specified.
(i) The machine has not been used
commercially.
* This guarantee is additional to, and in no
way diminishes the customers statutory
rights.
ENGLISH - 5

ENVIRONMENTAL INFORMATION

SERVICE RECOMMENDATIONS
GUARANTEE AND GUARANTEE POLICY
• Packaging is recyclable and plastic
components have been labelled (where
practical) for categorised recycling.
• Awareness of the environment must be
considered when disposing of 'end-of-life'
product.
• If necessary, contact your local authority for
disposal information.
Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual
and understand how to operate and maintain
your machine:
Failures not covered by guarantee
* Replacing Cutting Line.
* Failures as a result of not reporting an initial
fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product
in accordance with the instructions and
recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by
this guarantee.
* The following items listed are considered as
wearing parts and their life is dependent on
regular maintenance and are, therefore not
normally subject to a valid warranty claim:
Cutting Line, Electric Mains cable, Debris
Bag.
Caution!
*
Husqvarna Outdoor Products does not accept
liability under the warranty for defects caused
in whole or part, directly or indirectly by the
fitting of replacement parts or additional parts
that are not either manufactured or approved
by Husqvarna Outdoor Products, or by the
machine having been modified in any way