Recommendations For Use; Appliance Cleaning - Fimar TOP 3D Uso Y Mantenimiento

RECOMMENDATIONS FOR USE

1 - Remove the protection tube and container.
2 - Fill the tray with drinking water.
3 - Reassemble the container and protection tube.
4 - Press the switch (A) (position "I") to turn on bun heater punchers.
The indicator light (C) turns on.
5 - Press the switch (D) (position "I") to turn on water heating.
The indicator light (F) turns on.
6 - Adjust water temperature using the thermoregulator (E) and, using the switch (B), se-
lect bun heater puncher heating power.
When the appliance reaches ideal temperature, insert buns on the punchers to toast
them and fill the hot dog container to keep them warm.
Important
For best results, always keep the appliance running and only turn it off at the end
of the work day.
GB
Caution - Precaution
To prevent burns, use suitable utensils to place and retrieve hot dogs.
For first appliance use, remove any protective film lining and run at maximum tem-
perature (about 15 minutes) without food product to eliminate any unpleasant
odours. Wait until the appliance cools and, if odour persists, repeat the operation.

APPLIANCE CLEANING

Before cleaning the appliance (at the end of the day or when necessary) turn power off
(or disconnect the power cord) and make sure the cook surface is fully cooled.
– Remove the protection tube, container and water tray, clean with food safe detergents,
rinse and dry thoroughly before reassembly.
– Accurately clean the work surface and all surrounding areas.
– Clean external appliance surfaces with a damp cloth or sponge.
Caution - Precaution
Only clean with food safe detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
- 30 -
HOT DOG MOD. WD3
English language