Taurus 948191 Manual De Instrucciones página 7

ATTENTION!! Ensure that the dust bin is properly
installed before turning the vacuum cleaner on.
4.2. Cleaning Intake:
After repeated use, dirt and dust could accumulate
around the air intake and might reduce the working
efficiency. To ensure the best efficiency and constant
airflow, the intake should be cleaned periodically.
4.3. Cleaning Side Sweepers:
After being used for a period of time, the sweepers
need to be replaced to work more effectively.
Turn off the power, place bottom of the cleaner
upward on a flat surface. Hold the sweeper and
pull upward to remove the sweeper
The side sweepers can be rinsed and if they
become crooked, you can soak them in hot
water to make them recover the original shape.
Install the sweepers back after cleaning.
4.4. The operation and maintenance of the the
prod-uct is very simple. After each use, clean any
dirt left behind on the dust bin and filter. It is not
necessary to clean the intake after every use.
4.5. Disconnect the appliance from the mains power
supply before undertaking any cleaning task.
46. Clean the outer parts of the appliance with a
damp cloth with a few drops of washing-up
liquid and then dry. CAUTION! Do not immerse
electrical parts of the appliance in any liquid.
4.6. Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
4.7. Never submerge the appliance in water or
any other liquid or place it under running water.
5. Anomalies and repair
5.1. Take the appliance to an authorised
support centre if product is damaged or
other problems arise.
5.2. If the connection to the mains has been
dam-aged, it must be replaced and you should
proceed as you would in the case of damage.