Lanaform Stim Fit Manual De Instrucciones página 6

PRODUCT BREAKDOWNS AND SOLUTIONS
EN
Breakdowns
One electrode seems more powerful than
the other.
During the massage, you experience a
burning sensation or stimulation becomes
too weak.
The device won't turn on anymore.
The skin is reddening, causing itching or
tingling in the area being treated.
Even after increasing the intensity,
stimulation is still too weak or the user
cannot feel anything.
ADVICE REGARDING THE DISPOSAL OF WASTE
• All the packaging is composed of materials that pose no hazard for the environment and which can be
disposed of at your local sorting centre to be used as secondary raw materials. The cardboard may be
disposed of in a paper recycling bin. The packaging film must be taken to your local sorting and recycling
centre.
• When you have finished using the device, please dispose of it in an environmentally friendly way and in
accordance with the law.
LIMITED WARRANTY
LANAFORM® guarantees this product against any material or manufacturing defect for a period of two years from the date
of purchase, except in the circumstances described below.
The LANAFORM® guarantee does not cover damage caused as a result of normal wear to this product. In addition, the
guarantee covering this LANAFORM® product does not cover damage caused by abusive or inappropriate or incorrect use,
accidents, the use of unauthorized accessories, changes made to the product or any other circumstance, of whatever sort,
that is outside LANAFORM®'s control.
LANAFORM® may not be held liable for any type of circumstantial, indirect or specific damage.
All implicit guarantees relating to the suitability of the product are limited to a period of two years from the initial date of
purchase as long as a copy of the proof of purchase can be supplied.
On receipt, LANAFORM® will repair or replace your appliance at its discretion and will return it to you. The guarantee
is only valid through LANAFORM®'s Service Centre®. Any attempt to maintain this product by a person other than
LANAFORM®'s Service Centre will render this guarantee void.
6
Check
This is completely normal. The body reacts
differently depending on the areas being
treated.
The electrode gel is not sticking to the
skin properly.
The battery is too low.
Check that your skin is not allergic to the
adhesive patch.
Is your skin not clean enough?
Are the electrodes in the correct position?
Solutions
Make sure that the electrodes are in the
correct position and that they do not
overlap.
Apply a few drops of water to the pad. If
the problem persists, you should replace
the electrodes.
Recharge your device.
Check your skin's allergy history. If the
allergy is moderate, all you have to do is
change the position of the adhesive pad
or shorten treatment. If the allergy is
severe, stop using the device and consult
your doctor.
Use the device again after cleansing the
skin with a damp cloth.
Change their position.