Erbe 20150-100 Manual Del Usuario página 12

OBJ_DOKU-185853-008.fm Seite 12 Donnerstag, 26. November 2020 2:56 14
4.4 Connecting and setting up the product
Connect the footswitch plug into the footswitch socket on the
rear of the unit. Secure the plug in place by tightening the lock
nut.
Place the footswitch on a level floor where it cannot tip over.
Do not allow the footswitch cable to stretch above floor level
(risk of tripping). Instead, lay it on the floor.
4.5 Conducting a performance test
Before every use conduct a performance test.
4.6 Footswitch pedals and their function
Light gray pedal:
• The light gray pedal activates the applicator's water jet.
• If "Pedal" suction mode has been selected on the ERBEJET 2,
use of the light gray pedal activates both the water jet and
the applicator's suction function.
Dark gray pedal (two-pedal footswitch 20150-100 only):
• The dark gray pedal activates the applicator's suction func-
tion.
Black ReMode button:
• In programs with two setting options a and b the black Re-
Mode button allows you to toggle back and forth between
the two options.
12