Rollei Lion Rock 25 Tripod Head
Thank you very much for choosing a Rollei product. This compact and lightweight ball head offers high stability and a huge loading capacity. Furthermore, it can be tilted
and panned smoothly. There are 3 spirit levels which help to position the tripod head correctly. Please find all further functions described within the next paragraphs.
Please read this manual carefully before using this product.
1. Parts of the ball head
Security lock for quick
release plate
Platform
locking knob
Main knob
Damping pre-
Base
adjustment knob
Spirit level
Note
Release the locking button on the base plate to move the
quick-release plate horizontally.
Press the safety button and release the locking button to
remove the quick-release plate.
4. Verwendung der Dämpfung
The damping mechanism will help to
prevent that the camera and lens will
suddenly fall down if you loosen the
main knob. Therefore you can adjust
the damping according to the weight
of your equipment.
1. Attach your camera to the ball head as
described in point 3 and lock the platform locking knob (A).
2. Make sure that the damping pre-adjustment knob (D) is totally loosen.
3. Loosen the main knob (B) and check at which point the platform (C) can be moved with the
damping tightness which fits your requirements the most. You should be able to adjust the
camera angle, but without worry about the camera falling down suddenly.
4. Rotate the damping pre-adjustment knob (D) clockwise until you cannot move it anymore.
The damping is now set to this point and the main knob (B) cannot be loosen any further as
the position set now.
How to release the ball damping
1. Gently lock the main knob (B).
2. Rotate the damping pre-adjustment knob (D) counter clockwise until it is totally loosen.
3. Now the damping is released.
2. Parts of the platform
Quick release plate
Platform
3. How to attach the quick release plate
Main body
1
Loose
Panorama
locking knob
1. Loosen the locking screw of the base plate. In addition,
press down the safety button to open the base plate completely.
2. Align the quick release plate like shown in the picture.
3. First insert one side of the plate then the other
4. If the quick release plate is well positioned, lock the platform locking knob again.
5. If you want to use this quick release plate on other Arca-Swiss compatible heads that don't
have anti-slippery grooves, please remove the anti-slippery screws on both sides by using a
wrench.
A
B
D
Safety button
Platform locking knob
2
Press
Tight
Anti-slippery groove
5. Maintenance
C
• Avoid sand or other small objects going inside the ball
head. Please use a dry cloth to remove dirt on the ball
head after using. Do not use any lubricant or oil for
cleaing.
Modell
Lion Rock 25 54 mm
3
Anti-slippery screw
4
Loose
Ø Ball
Base
Max.
Head
Width
Height
Weight
66 mm 100 mm
621 g
7
Scale
Spirit level
Tight
Max.
Load
25 kg