INSTRUCTIONS FOR USE
- Before connecting the plug to the mains, please check that the on/off switch is in the OFF
position. Plug the unit to the mains. Switch the unit on; red LED light up.
The locking mechanism makes it easy to store the appliance. It allows the appliance to be
closed by simply pushing one plate against the other. Do not heat the device when it is in
the locked position.
- Please unplug when not use the appliance.
- To use the appliance correctly. Place dry hair between the two plates and press the handle
closing the straightener. Then slide it towards the ends of the hair.
- Let it cool down before it is stored.
Never use the product if your hair is still wet.
Caution: hair straighteners are powerful tools and should always be used with extreme
care. If you use the unit in the wrong way, you can run the risk of over drying your hair,
even burning.
CAUTION: metal plates are hot, any contact with the skin may cause skin burn.
MAINTENANCE AND CARE
Unplug the unit from the mains and let the product cooling down on a heat-resistant surface.
Clean the unit with a soft dry cloth. Keep the plates clean and free from dirt, styling products
and gel.
Never dip the unit into water or other liquids. Never use solvents and detergents.
Never try to repair the unit by yourself but always address to specialised centres.
SYMBOL
Class II appliance
This item is made in conformity with all the applicable European directives
DISPOSAL
The device (including its removable parts and accessories) must not be disposed
of together with municipal waste at the end of its life, but in compliance with European
Directive. Since it must be handled separately from household waste, either carry it to a
separately collected waste disposal centre for electrical and electronic appliances or give it
back to the retailer on purchasing a new device with the same purpose. Any infringement
will be severely prosecuted.
Operation use conditions: Room temperature: from 10°C to 40°C. Relative humidity: from
30% to 75% without condensation. Pressure: from 700 – 1060 hPa.
Environmental transportation and storage conditions: Temperature: from 10 to 40°C.
Humidity: from 5 to 95%. Pressure: from 700 – 1060 hPa.
Specifications and designs are based on the latest information available at the time of
printing and subject to change without notice.
9