Drive AQUAJOY SAVER Instrucciones De Funcionamiento página 7

How to bathe with your Aquajoy Saver
 After installing your bathlift and connecting the hand control, simply press and hold the UP
button to raise the seat (Fig 10).
 Raise the seat until it is level with the top of the bath, then take your finger off the UP
button.
 NOTE: Make sure that the bathlift side flap is level with the edge of the bath (fig.10)
before transferring.
 Sit on the bathlift flap and slide/shuffle over to the middle of the seat and lift one leg at a
time over the side of the bath. Move / turn your body facing forward so that you are sitting
in the correct position for comfortable bathing.
 Press and hold the DOWN button to lower yourself to the required position. Taking your
finger off the button at any point will stop the bathlift from moving (Fig 11)
 When you have finished bathing simply press and hold the UP button to raise the bathlift
back up to the top of the bath (Fig.10)
 You can now transfer off the lift using the side flap for support.
NOTE: Taking your finger off the 'Up' or 'Down' buttons at any time will stop the bathlift seat
moving.
[Fig.10]
[Fig.11]
7