Drive AQUAJOY SAVER Instrucciones De Funcionamiento página 16

How to remove the Actuator from your SAVER Bathlift –
(Only to be carried out by trained AquaJoy personnel):
In the unlikely event that you have to remove your actuator this can be done by separating
the SAVER into three sections.
LIKE TO INSTALL AND REMOVE THE BATHLIFT IN 3 SECTIONS AND IF YOU HAVE BEEN
TRAINED BY AQUAJOY BATHLIFTS LTD ON HOW TO DO THIS)
 Seat section including actuator
 Base section
(B)
 Actuator
(C)
How to remove the actuator from the seat section: (Only follow these instructions if you
would like to remove the actuator from the seat section)
 Release the Lower Actuator bracket
bracket upwards and swing to open.
 Pull up on the Actuator latch at the back of the seat
allow the actuator to disengage itself from the bracket. The actuator can now be removed
from the seat section.
Fig 8
PLEASE NOTE: ONLY REMOVE THE ACTUATOR IF YOU WOULD
(A)
(Fig 8) by pulling out the security pin then lifting the
Seat Section
Base Section
(Fig 9) and lift the seat sufficiently to
Fig 9
(A)
(B)
Actuator (C)
16