Standard Components - Drive AQUAJOY SAVER Instrucciones De Funcionamiento

Standard Components

1 x AquaJoy Saver seat section
1 x Aquajoy Saver base section
1 x Actuator (Attached to Seat Section)
1 x Hand control
1 x Charger
1 x User Manual.
2 x Transit Clip (REMOVE BEFORE USE!!!)
2 x Side flap diverters (in with user manual)
 Unpacking – Simply remove the bathlift parts from the packaging and check them to make sure that
no damage has been caused during transit.
 Hand Control – Please place this on charge for 12 hours before using your Aquajoy Saver Bathlift for
the first time. Connect the hand control to the battery charger and plug the charger into a mains
power supply - OUTSIDE THE BATHROOM and allow the battery to charge for a minimum of 12 hours.
We recommend you charge your battery hand control continuously when not in use. You cannot
overcharge your battery hand control.
4