Putting Out Of Operation; Maintenance And Cleaning - Abicor Binzel TCS Compact Manual De Instrucciones

TCS Compact

8 Putting out of operation

NOTICE
• As the TCS Compact cleaning station is integrated into a welding system, the procedure for putting it out of operation
depends on the robot control system.
• When decommissioning the system, ensure that the procedures for switching off the welding components are observed.
1 Switch off the robot control.

9 Maintenance and cleaning

Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed, or worn parts.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Check and wear your personal protective equipment.
The TCS Compact cleaning station is virtually maintenance free. However, it is in your interest to regularly clean and assess
the mechanically stressed parts in order to maintain the system's value and ensure it remains fully functional.
BAL.0617.0 • 2021-05-20
8 Putting out of operation
EN - 31