Linde REDLINE C 200 Serie Instrucciones página 8

english
secure the main switch against unexpectedly being turned back on. Check fittings which have come undone for
correct positioning. After completing maintenance work, make sure that the safety installations are functional
again.
Danger! For safety reasons, repairs and maintenance work only to be carried out by Linde service companies.
10.2 Malfunctions
By experience these regulators have a high level of reliability. Should any of the following breakdowns occur
despite this, exchange the regulator and have the defective equipment repaired:
Gas release at the outlet of the regulator when the hand-wheel is completely closed. Display of increasing pressure
on the outlet pressure gauge when the valve is closed or no gas is flowing. Gas release at the regulator cover. Gas
release at a gasket. Too high pressure drop with normal flow. Gas release at the pressure relief valve. Gas release
at the pressure gauge. Pointer of a pressure gauge does not return to "0". Faulty pressure display.
11. return of equipment under pressure
Danger! Pressurized equipment can only be returned which are completely free of fluids and have been purged.
The packaging must be sealed gas-tight.
Danger! Pay attention to local rules and legislation with regards to transport and storage of hazardous goods
and materials.
12. Manufacture
The right to technical changes which are progressive is reserved. The manufacturer has all rights.
Edition SPG-614/V2/02.2011 Printed in Germany.
6