Tabla de contenido
GB
(2) a. Place the camera lens forwards, check the gravity center of camera.
b. Unlock the quick release plate safety lock ①, adjust camera position until it can stay
stable at any angles.
c. Lock the safety lock ①. Tilt the camera up or down, if it stays stable, it means
balanced.
4.2 Balance Roll Axis
a. Tighten the tilt axis position lock ①, unlock the roll axis position lock ②, check
gravity center of camera.
b. Loosen the cross arm lock screw ③, slide cross arm
position.
c. Tighten the cross arm lock screw ③, and tilt the camera to the left or right, if it stays
stable, it means balanced.
4.3 Balance Pan Axis
a. Tighten the roll axis position lock
axis position lock ②, loosen vertical arm lock screw ③.
b. Hold the handle angled to 15°~ 20°, check the camera's movement (roll axis will
point down if not balanced).
c. Slide vertical arm
succeeded.
d. Tighten the vertical arm lock screw ③.
④
to balance the camera
5
⚠
Long press power button, release the button until it
shows
Download the detailed user manual from official website manfrotto.com
8
①
after balanced tilt axis and roll axis. Unlock pan
④
to balance it until the camera stays there at any angles, balance
Power ON/OFF
Be sure to unlock the position lock before using
the gimbal.
on display.
Detailed Manual
Tabla de contenido
