Tripp-Lite B155-002-DP-V2 El Manual Del Propietario página 6

Installation
1. Connect the hub's built-in cable to the computer's
2. (2-Port Models) – Connect the included USB
3. (3- and 4-Port Models) – Connect the included
4. Connect a monitor to an available output port on
5. Repeat step 4 for each additional monitor you are
6. Turn on the power to the connected monitors, then
7. Use your video card's display settings screen to
20-11-191-933D83.indd 6 20-11-191-933D83.indd 6
DisplayPort or Mini DisplayPort output.
Micro-B cable between the hub and a USB port
on the computer or USB charger. The green Power
LED will illuminate.
external power supply to the hub and plug it into
a Tripp Lite Surge Protector, Uninterruptible Power
Supply (UPS) or Power Distribution Unit (PDU). The
green Power LED will illuminate.
the hub.
Note: The maximum distance between the hub and the
connected monitor must not exceed 15 ft. (4.6 m).
connecting.
power on the source. The orange port LEDs will
illuminate to indicate a signal is being received and
video will appear on the connected monitors.
adjust how video is displayed on the connected
monitors.
6
7/30/2021 11:12:43 AM 7/30/2021 11:12:43 AM