Assembly - Klarfit Ellifit FX 250 Manual De Instrucciones

46
81
82
85

ASSEMBLY

Note: Set the resistor voltage to level 8 before assembly.
Attach the front stand (5) to the main part(1) using retaining screws (78)
with curved washers (64) and cap nuts M8 (65).
Attach the rear stand (4) to the main part (1), using retaining screws (78)
with curved washers (64) and cap nuts M8 (65).
Screw M8 x 25
Spring washer Ø8.2"
Curved disc ID16*OD26
Key
1
2
2
2
3
EN
27