Control Panel And Function Keys; Remote Control And Features - Klarstein BARETT Manual Del Usuario

EN
32

CONTROL PANEL AND FUNCTION KEYS

Timer Light
• Press the POWER button to switch the extractor bonnet on and off.
• Press the SPEED button several times to run the motor at the following power: low >
medium > high > low. The display shows the corresponding speed: 1 > 2 > 3 >1.
• Press the LIGHT button to switch on the light. Press the button again to switch it off.
• When the bonnet is in operation and the TIMER button is pressed, the bonnet
switches to timer mode. The default setting is 9 minutes. The timer then starts
counting down the time. The remaining time is shown in the display: 9 > 8 > 7 > 6 >
5 > 4 > 3 > 2 > 1 > 0. When [0] is shown, the bonnet is automatically switched off.
Press and hold the TIMER button to deactivate the timer again.

REMOTE CONTROL AND FEATURES

increase
Timer Light
reduce
Speed Power