Before Installation; Installation Procedures - Mirabelle Galatia MIRGA241 Instrucciones De Instalación

BEFORE INSTALLATION

• Confi rm that there is enough fl oor space to install the toilet unit and that the bathroom door will open/close
without obstruction.
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
.

INSTALLATION PROCEDURES

8-7/8"
(225mm)
Step 1: Put the toilet at the appropriate location, sign the
bolts mounting locations.
Step 2: Drill holes on the ground at the signed locations.
Put the fl ange on the drain hole and lock the fl ange bolts. And turn the fl ange 1/4 circle.
12"
(305mm)
Step 3: Confi rm that the mounting ground is clean,
especially the signed toilet mounting location.
Step 4: Mount the rubber gasket onto the toilet drain.
Position the toilet squarely to wall and with a rocking
motion, press bowl down fully to ensure adapter seals
into fl ange.
Step 5: Alternately tighten screws until toilet is fi rmly
seated on fl oor. CAUTION:DO NOT OVERTIGHTEN NUTS,OR BASE MAY
BE DAMAGED!
2