Safety Concerns; Brake System; Gear Shift (Only For Carl 280); Gear Shifting Operation - Blaupunkt E-MOBILITY CARL 280 Manual De Instrucciones

If you can't reach the pedal with heel, then lower the saddle.
You can change the saddle angle and the front / rear position by loosening the Allen
screw and adjusting the saddle to your convenience. Tighten the Allen screw again
when you have adjusted the correct position.

SAFETY CONCERNS

The seat post has a MAX marked line (that is the safety line), this is the
MAX height that you can raise the saddle. In any cases of adjustment,
the MAX marked line should always below the seat post clamp.
Serious injury may be caused to the rider if the saddle height is raised
beyond the MAX line.

BRAKE SYSTEM

Make sure how your brakes are working before you start driving.
Left Brake Lever:
Right Brake Lever:
Please note that unfavorable weather conditions may affect the braking performance!

GEAR SHIFT (ONLY FOR CARL 280)

GEAR SHIFTING OPERATION

Be sure to operate the gear shift only while pedaling.
• If you want to shift in a lighter gear, push the lever (A) forward step by step for
each of the gears. If you move the lever further forward, you can also skip a gear.
• If you want to choose a heavier gear, push the button (B) to shift to each of the gears.
Front Brake
Rear Brake
(A) Lever / gear down
(B) Button / gear up
27