Craftsman 316.794800 Manual Del Operador página 7

The completed blower tube should look like Figure 6.
Elbow Tube
Flex Tube
Hose Clamp
Upper Blower Tube
First Lower
Blower Tube
Second Lower
Blower Tube
Nozzle
WARNING:
To avoid serious personal injury, make
sure that the blower tubes are locked in place or firmly
installed.
ASSEMBLY INSTRUCTIONS
Hose Clamp
Throttle Cables
On/Off Switch
Throttle Grip
Fig. 6
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig.
7) as shown, making sure not to crimp the cables.
Zip Tie
Adjusting the Handle
1. Rotate the throttle grip counterclockwise around the blower
tube until it is pointing directly downward (Fig. 8, A).
WARNING:
Do not rotate the handle clockwise to
adjust. This may cause the throttle cables to
disconnect from the throttle grip or the engine.
A
2. Pull or push the throttle grip along the handle tube until its
distance from the backpack blower is comfortable (Fig. 8, B).
3. Align the throttle grip with the slot closest to the comfortable
place and rotate the throttle grip clockwise into the upright
position (Fig. 9).
Zip Tie
Fig. 7
B
Fig. 8
Fig. 9
7