Black+Decker CS1825ST1 Manual De Instrucciones página 8

ENGLISH
The spiked bumper may become sharp during the life
u
of the product. Handle with care.
When handling the product the chain bar may become
u
hot, handle with care.
Additional power tool safety warnings
Warning! Additional safety warnings for compact
chainsaws.
The intended use is described in this instruction manual. Do
not use the tool for purposes not intended; for example do
not use the tool to fell trees. The use of any accessory or
attachment or performance of any operation with this tool
other than those recommended in this instruction manual may
present a risk of personal injury.
Wear close fitting and protective clothing including a
u
safety helmet with visor/goggles, ear protectors, non- skid
safety footwear, protective bib trousers and strong leather
gloves.
Always position yourself out of the path of falling
u
branches.
The safe distance between a branch to be felled and
u
bystanders, buildings and other objects is at least 2 1/2
times the length of the branch. Any bystander, building or
object within this distance is at risk from being struck by
the falling branch.
Pre-plan a safe exit from falling branches. Ensure the exit
u
route is clear of obstacles that would prevent or hinder
movement. Remember wet grass and freshly cut bark is
slippery.
Ensure someone is nearby (but at a safe distance) in case
u
of an accident.
Do not use the tool while standing in a tree, on a ladder or
u
on any other unstable surface.
Keep proper footing and balance at all times.
u
Hold the tool firmly with both hands when the motor is
u
running.
Do not let the moving chain contact any object at the tip of
u
the guide bar.
Start cutting only with the chain moving at full speed.
u
Do not attempt to enter a previous cut. Always make a
u
fresh cut.
Watch for shifting branches or other forces that could
u
close a cut and pinch or fall into the chain.
Do not attempt to cut a branch when the diameter of the
u
branch exceeds the cutting length of the tool.
Always remove the battery from the tool and place the
u
chain cover assembly over the chain when storing or
transporting the tool.
Keep the saw chain sharp and properly tensioned. Check
u
the tension at regular intervals.
8
(Original instructions)
Switch the tool off, allow the chain to stop and remove the
u
battery from the tool before carrying out any adjustment,
servicing or maintenance.
Only use genuine replacement parts and accessories.
u
Causes and operator prevention of kickback
Kickback may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinches
the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of
the chainsaw which could result in serious personal injury.
Do not rely exclusively upon the safety devices built into your
chainsaw. As a chainsaw user, you should take several steps
to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and / or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below:
Maintain a firm grip, with thumbs and fingers
u
encircling the chainsaw handles. With both hands on
the chainsaw, position your body and arm to allow
you to resist kickback forces. Kickback forces can be
controlled by the operator, if proper precautions are taken.
Do not let go of the chainsaw.
Do not overreach and do not cut above shoulder
u
height. This helps prevent unintended tip contact and
enables better control of the chainsaw in unexpected
situations.
Only use replacement guide bars and chains specified
u
by the manufacturer. Incorrect replacement guide bars
and chains may cause chain breakage and/ or kickback.
Follow the manufacturer's sharpening and
u
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased
kickback.
Safety recommendations for the chainsaw
We strongly recommend that first time users obtain
u
practical instruction in the use of the chainsaw and
protective equipment from an experienced user. Initial
practice should be completed sawing logs on a saw horse
or cradle.
We recommend that when carrying the chainsaw that you
u
remove the battery and make sure that the saw chain is
facing backwards.