2.1.2 Modes of use - Switching on and Adjust-
ment.
The child unit must be placed at about
1 - 1.5 metres from the child, on a flat, level surface
making sure to direct the microphone (5) toward
the child.
Warning: the transmitter, mains adapter and its
power cord must be kept out of reach of children.
- Child unit on/off switch (2).
Press this button for about 3 seconds and the child
unit will switch on. Do not press for too long, oth-
erwise the child unit may not switch on. Press this
button (2) again for about 3 seconds and the child
unit will switch off.
2.2 Parent unit
2.2.1 Power:
WARNING. The rechargeable batteries should only
be charged via the mains adapter (1) supplied
and can be performed both if the parent unit is
switched on and if the parent unit is off.
If the unit is powered by the mains adapter (1) or to
charge the rechargeable NiMH batteries:
- insert the mains adapter jack (1) in the power
connector (8) on the side of the unit.
- insert the mains adapter plug in an easily acces-
sible power socket.
Warnings
- Periodically inspect mains adapters (1). If the
power cord or plastic parts show signs of dam-
age, do not use them and contact a qualified
technician.
- Do not leave mains adapters (1) plugged into the
outlet when devices are not in use and/or not
connected to the mains adapters (1)
2.2.2 Modes of use - Switching on and Adjust-
ment
- The button (2) is the On/Off button.
Press the On/Off button (2) for about 3 seconds
and the parent unit will switch on. Do not press
for too long, otherwise the parent unit may not
switch on.
Press this button (2) again for about 3 seconds and
the parent unit will switch off.
- Loudspeaker volume adjustment buttons + and
- (3a-3b).
Press the button (3a) corresponding to the symbol
"+" once to increase volume by one level. Press the
button (3b) corresponding to the symbol "-" once
to decrease volume by one level. The unit offers 10
volume setting levels. The default level is 5.
A beep will be heard each time volume is in-
creased or decreased by a level. When volume
reaches maximum or minimum level, 3 consecu-
tive beeps will be heard. The device stores the
volume level selected during previous use in its
memory, even after it has been switched off and
switched back on.
2.2.3 Luminous and acoustic operating status
indicators
- The power, link and battery status indicator light
(5) provides 6 different pieces of information:
- Indication that the device is on and properly con-
nected to Baby unit:
- the indicator light (5) will light up steady green.
- Indication of loss or absence of link with the par-
ent unit during operation:
- the indicator light (5) starts to flash green and
after about 5 seconds you will hear a beep every
2 seconds.
- As soon as the link is restored, the beep will
switch off and the indicator light (5) will light up
steady green.
NB: when the parent unit switches on, it searches
for the channel to link with the child unit; therefore
the indicator light (5) will flash green until a link is
established.
- Indication of device off:
the indicator light (5) will switch off.
- Indication of rechargeable batteries (9) almost
flat:
the indicator light (5) lights up steady red and, at
the same time, a beep every 2seconds is heard.
If you want to continue using the device, it is ad-
visable to charge the rechargeable batteries (9)
otherwise the device will stop working. Charge
the rechargeable batteries (9) by connecting the
mains adapter (1) to the parent unit power and
charging connector (8). When charging starts, the
beep will switch off.
- Indication of rechargeable batteries (9) charging:
at the start of charging the indicator light (5) will
light up red and begin to flash.
Leave the battery to charge until the indicator light
(5) switches off.
The parent unit can still be used to monitor sounds
made by the child while the rechargeable battery
is charging, but the time required to reach full
charge will be longer.
- Indication of rechargeable battery charged:
the indicator light (5) will switch off.
14