Still Image Camera Settings; Color And Lighting Settings - Nokia N86 8MP Guia Del Usuario

Still image camera settings

To change the main settings, in the image mode, select
Options Settings
>
Image quality
●
only). The better the image quality, the more
memory the image consumes.
Add to album
●
Photos.
Record location
●
to each image file, select On. Receiving a GPS signal
may take time or the signal may not be available.
Show captured image
●
the captured image after it is taken or to continue
image capturing immediately.
Default image name
●
for the captured images.
Extended digital zoom
●
available in the main
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, On (paused)
pause at the digital and extended digital step point,
and Off allows a limited amount of zoom while
retaining the image resolution. Use the extended
zoom only when getting closer to the subject is
more important than the final image quality. The
overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
38
and from the following:
— Set the resolution (main camera
— Save the image to an album in
— To add GPS location coordinates
— Select whether to view
— Define the default name
— The setting is only
camera.On (continuous)
allows the zoom increments to
Capture tone — Set the tone that sounds when you
●
capture an image.
Memory in use — Select where to store your
●
images.
Restore camera settings
●
settings to default values.

Color and lighting settings

In the active toolbar, select from the following:
Flash mode ( ) (image only) — Select the desired
●
flash mode. Color tone ( ) — Select a color effect.
●
Switch video light on
●
— Switch the video light on or off (video mode
only).
White balance ( ) — Select the current lighting
●
condition. This allows the camera to reproduce
colors more accurately.
Exposure compensation
●
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to
+1 or +2 to compensate for the background
brightness. For light subjects against a dark
background, use -1 or -2.
Sharpness ( ) (image only) — Adjust the
●
sharpness of the image.
Contrast ( ) (image only) — Adjust the difference
●
between the lightest and darkest parts of the image.
— Restore the camera
or Switch video light off
( ) (image only) — If you