Zoom ADSL X6V Inicio Rápido página 12

Connecting the X6v to a Landline
If you connect the X6v's TELCO (Telephone Company) port to a landline
telephone service, you can choose to make some calls through your
landline and other calls over the Internet. If the landline is also set for
DSL service, be sure to connect an ADSL filter between the telephone
line and the X6v's TELCO port.
You can use the Zoom Configuration Manager to set up the landline
connection.
1
Make sure that your computer and modem are powered on, and that
the ETHERNET, DSL, PHONE, and TELCO cords are secure in the
X6v and external ports.
2
Open your Web browser and type
address field.
3
When the authentication dialog opens, type user and password
(each in lower-case letters) in the User Name and Password fields.
4
Click OK.
5
On the ADSL Setup page, click the VoIP icon
6
Click VoIP Express Setup on the My VoIP Account Status page.
7
On the My VoIP Account Express page, in the field labeled If my call starts
with these digits . . .:
•
Enter area codes, city and/or country codes, and entire numbers.
Remember to include any required prefixes like 011, 00 or 1.
•
Separate your entries with a comma or a comma and a space.
Note: The numbers that you enter will be dialed on your landline. All other
numbers will be dialed over the VoIP connection. There is a limit of 18
entries for the landline connection.
8
Click Save These Settings.
When you complete the landline setup, you can exit the Zoom
Configuration Manager and start making calls.
12
in your browser's
http://192.168.0.1
.