Zoom 4506AG Inicio Rápido página 2

To use AC power, plug the router's power cube into an AC outlet and into the POWER jack on the back of
the router. Then you can use the router AND charge the battery at the same time automatically, or you
can only charge the battery. If you're only charging the battery, it's best to have the router switched OFF.
Charging typically takes about 2 ½ hours.
The Power indicator tells you the following when the router's power switch is ON:
•
Solid Green: The power cube is plugged in and the battery is fully charged.
•
Flashing Green: Power is being provided by the battery, not the power cube.
•
Amber: The power cube is charging the battery.
•
Red: The battery is low and the power cube is not plugged in.
Using Your Router with a 3G Modem
1
Plug your 3G USB modem into the router's USB port.
2
Optionally, connect the power adapter to the receptor on the back panel of your router and plug the
other end of the power adapter into a wall outlet or power strip.
Note: If the battery is charged, you have the option of using the router without the
power adapter.
3
Turn on the router's POWER switch, located on the rear panel.
The Power indicator on the router's top panel turns on, then the WiFi (left) and USB (right)
LEDs blink green. The WiFi LED continues to blink to signify broadcast activity.
4
A computer, mobile phone, game station, or other device with wireless 802.11n, g, or b capability
can access the Internet wirelessly through the 3G router. To make the wireless connection, you
must first locate the wireless network connection setup on your device, and then select the Zoom
network. For example, on Windows computers, click the wireless connection icon on the Task Bar,
click Available Wireless Networks, select Zoom from the list of available wireless networks, and then
make the connection.
5
The router comes set up for wireless with no security. If you want wireless security, you need to set
up the 3G router and each device for the security that you want. If you're experienced with wireless,
you can probably do that easily by using the Configuration Manager, as discussed in Changing the
Router's Default Values. You can also get more detailed instructions in the Zoom 3G Wireless-N
Travel Router User Guide located on the product CD.
6
You can also plug a computer or other device into the router's Ethernet port. This is recommended
if you're changing the router's default values, and sometimes an Ethernet connection is more
convenient or secure than connecting to the router wirelessly. To connect via Ethernet, simply plug
2