Hunter QuietFlo 30095 Manual Del Usuario página 3

Setting Up Your Air Purifi er
1. Remove your air purifi er from the box and take it out of the clear plastic protective bag.
2. Place your QuietFlo
3. Before turning the Air Purifi er 'on,' open the front grill.
4. The HEPA fi lter is already installed in the correct position, but you need to con-
5. The carbon pre-fi lter is mounted inside of the front grill with "hook" tape. Con-
6. Place the fi lter installation reminder sticker on the inside edge of the front grill.
7. Replace the fi lter and front grill. Be sure that the bottom grill tabs are in position
8. Plug the unit into a 120V electrical outlet.
HEPA Filter
Pre-Filter
Front
Grill
41478_Purifier_REV 3/25/04.indd 3 3/25/04, 5:13:20 PM
®
®
Air Purifi er on a fi rm, fl at fl oor.
• For Models 30117, 30119 & 30145: To release the front grill, press the buttons
on the side until the front grill slides easily over the buttons. (Refer to Figure 1.)
• For Models 30095, 30214 & 30215: To release the front grill, place your
fi ngers behind the tabs and pull forward. (Refer to Figure 2.)
fi rm that it is fully inserted. To remove, grasp the edge of the fi lter frame and pull
it forward. Notice the orientation of the fl aps and seal, which should be pressed
fi rmly into the fi lter opening.
fi rm that it covers the grill vents. (Refer to Figure 3.)
Circle the month and write the year of installation for the pre-fi lter and HEPA fi lter.
fi rst, and then push the top of the grill forward until it is closed. The unit is now
ready for normal operation. NOTE: This unit will not operate unless the door is
placed in the correct position.
AIR PURIFIER PARTS
Buttons for
opening the
front grill
Figure 1 - Models 30117,
30119 & 30145
Figure 3
HEPA Filter
Pre-Filter
Front
Grill
Figure 2 - Models 30095,
30214 & 30215
Hook Tape
Grill Vents
Hook Tape
3
Tabs for
opening the
front grill