Black and Decker FSMH1621 Manual De Instrucciones página 10

ENGLISH
Problem Step Possible solutions
The steam mop will only produce steam
The steam mop is 7
once the handle is pulled back from the
not producing
upright position.
steam.
8 Check that the water tank (8) is full.
NOTE: When first filled or after running dry it
can take up to 45 seconds for steam to be
produced.
Check that the Steam head (11) is firmly
9
docked into the steam mop body (9).
10 Check steps 5, then 1, then 2, then 3.
The digital controls 11
Check steps 4, then 5, then 1, then 2, then 3
go out during use.
The steam mop 12 Check steps 7, then 8, then 9, then 5, then 3.
stops producing
steam during use.
The steam mop has 3 settings. Press the
The steam mop is 13
autoselect button (6) to reduce the amount of
producing too
steam being produced.
much steam during
use.
Check that the steam burst button (28) has
14
not been pressed.
The steam mop has 3 settings. Press the
The steam mop is 15
autoselect button (6) to increase the amount
producing too little
of steam being produced.
steam during use.
Press the steam burst button (28) to
16
temporarily increase the amount of steam.
The hand held steam cleaner has a lock off
No steam is being 17
feature. Lift the lock off switch (2) and pull
produced from the
the trigger switch (3). After a few seconds
hand held steam
steam will be produced.
cleaner when the
trigger is pulled.
18 Check steps 8, then 1, then 2, then 3.
The hand held steam cleaner will begin to
The hand held 19
produce steam after 15 seconds and will
steam cleaner is
reach maximum steam flow after 45
producing too little
seconds.
steam during use.
Firmly press the hand held steam cleaner
The hand held 20
release button (20) down, then pull the hand
steam cleaner will
held steam (5) cleaner from the steam mop
not come out from
body (9).
the steam mop
body.
Refer to the assembly chapter of the manual
The accessories 21
for correct fitting instructions of all parts and
keep falling off the
accessories.
unit.
10
(Original instructions)
Problem Step Possible solutions
Refer to the assembly chapter of the manual
Steam is escaping 22
for correct fitting instructions of all parts and
from unexpected
accessories.
areas of the unit.
Where can I get 23
www.blackanddecker.co.uk/steammop
further information www.blackanddecker.ie/steammop
/ accessories for
my steam mop.