Safety In The Workplace; Personal Safety - Steinberg Systems SBS-TW-10000 Manual De Instrucciones

e) If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.

2.2. SAFETY IN THE WORKPLACE

a)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
b) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d) If a fire starts, use solely powder or carbon dioxide
(CO ) fire extinguishers suitable for use on live
2
devices to put it out (for the models SBS-TW-10000,
SBS-LW-500, SBS-LW-10000 connected to the mains
by means of the power supply).
e) Keep these instructions for use for further reference.
If the device is transferred to third parties, the
instruction for its use shall be transferred, too.

2.3. PERSONAL SAFETY

a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instructions on how to operate the device.
EN
2.4. SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b) When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
d) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
e) Clean the device regularly to avoid a durable
encrustation of dirt.
f) Do not drop or throw objects on the device. The
objects to be weighed should be placed carefully on
the scale pan.
g) Exceeding the maximum load of the scale can result
in device damage.
h) Only adult persons may install and remove the
batteries.
i) Replace the batteries only with new ones of the same
type.
j) All batteries shall be replaced by new ones. Do not
install used and new batteries at the same time.
k) Do not install rechargeable batteries and regular
batteries at the same time.
3. USE GUIDELINES
The digital table scale and the precision scale are designed
to measure the weight of items placed on the scale pan and
to count the items based on their total weight.
The user is liable for any damage resulting from non-
intended use of the device.
3.1. DEVICE DESCRIPTION
Model SBS-TW-10000
A B C
Models SBS-TW-3000, SBS-TW-500
1
2
Model SBS-LW-500
3
1
2
Model SBS-LW-10000
1
2
1. Scale pan
2. Control panel with display
3. Container
A. ON/OFF button
8
1
2
D
B
D
A
C
C
D
B
A
C
D
B
A
Rev. 25.09.2018