Safety Advice - AEG DELICATE 7000 SI7-1-4WB Manual De Instrucciones

10
The iron is equipped with 3-way auto-off function. If the iron is left unattended on soleplate or the side, it automatically
turns off after 30 seconds. If left unattended on the heel it automatically turns off after 8 minutes. To turn it on again, move
the iron. A short beep can be heard before the iron is switched off by itself. To reactivate the iron, move it shortly and it is back
to working mode.
11
To switch-off the steam iron, turn the temperature selector to position 0, a short beep can be heard and all lights will turn
off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull.
Empty the water tank and let the iron cool completely before storage.
12 Always store the iron on its heel with the cord twisted loosley around the cable wrap facility. To clean exterior surfaces, use
damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.
CLEANING (DO NOT USE ANY DETERGENT)
13 Flush Clean (K). Fill the tank with water to max level (M) and select "Linen" programme. When headlight flashes, unplug the
iron. Hold the iron over a sink, press the Flush Clean button (K). Use a full tank of water. Release button to stop Flush Clean
function. Repeat the procedure if necessary.
NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!
14 Soft Water Activator (L) is recommended right after Flush Clean. Open water filling cover (P) and pull the Soft Water
Activator (L) out for disposal. Replace with new Water Softener System AEG AEL08/900923065. Both Flush Clean & Water
Softener System in combination ensure a clean, soft steam for best ironing results and longer lifetime of your steam iron.
15 Cleaning the soleplate (O). To remove burnt residues, iron over a damp cloth while the iron is still hot.
To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as they may
damage the surface.
HOT SOLEPLATE INDICATOR (A)
16 Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot by changing its
colour from black to red.
During heat-up time, the soleplate might be hot even though the sticker didn't turn red. Once the temperature of the
Note!
soleplate is < 40°C, the colour changes back to black showing the iron is ready to be stored away.
Enjoy your new AEG product!

SAFETY ADVICE

Read the following instruction carefully before using machine for the first time.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Keep the iron and its cord out of reach of children less than 8 years of age when it is
energized or cooling down.
• The surfaces are liable to get hot during use .
• This product is appropriate for use with tap water. It is recommended to use AEG
AquaSense filtered water, taking out impurities like limescale. If the tap water is
particularly hard, use a mix of 50% distilled water and 50% tap water.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• The iron is not to be used if it has been dropped, if there are visible signs of damage
on the iron or its cord or if it is leaking.
• The appliance must only be connected to an earthed socket. If necessary an extension
cable suitable for 16 A can be used.
• If the appliance or the supply cord is damaged, it must be replaced by the
www.aeg.com
GB
DE
AR
ES
FR
GR
NL
PT
7