Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
It may be possible that your steam iron does not produce steam immediately after filling it with water. The reason for
this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by
pressing the steam on/off button. For your convenience the steam will be produced after you release the steam on/
off button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best
steaming result.
COMPONENTS
. Hot soleplate indicator
A
. Water spray nozzle
B
. Light indicator for heat-up/cool-down
C
. Headlight illuminating ironing area
D
. Temperature selector
E
. Water filling container
F
. Steam jet button
G
. Spray button
H
.
Steam on/off button
I
Picture page 2-4
GETTING STARTED AND OPERATING INSTRUCTIONS
1
Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to remove foreign
particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure surface at the same height as
an ironing-board. Unwind and straighten the power cord.
2
Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open the filling
aperture cover (P). Use the water filling container provided (F), pour water to maximum level (M). Close the cover (P). This
product is appropriate for use with tap water. It is recommended to use AEG AquaSense filtered water resp. a mix of 50%
distilled, 50% tap water if the tap water is particularly hard.
Always refill the water tank to MAX level using cold water.
Caution! Never operate the appliance without any water in the tank.
This product is equipped with a detachable Soft Water Activator (L), we recommend to replace the Soft Water Activator every
3 months.
Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to
your garments. If necessary, wipe the soleplate with a slightly damp cloth.
3
Connect the steam iron to the mains supply. Select the ironing programme from the temperature selector (E) on the steam
iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the first time, temporary vapours/
odours may occur. The iron is equipped with an auto-steam function, which automatically adjusts the steam output to the
selected ironing programme supporting best ironing results.
4
As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the headlight (D)
turns on. Now the iron is ready to be used.
5
To activate the steam function, press and hold the steam on/off button (I). To stop the steam function, release the steam
on/off button.
6
To use the continuous steam function, slide the steam button lock (R). To stop the continuous steam function, slide the
steam button lock.
7
For extra steam, press the steam jet button for one second.
Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the buttons,
use up the steam before putting the iron back on its heel.
Caution! Never release steam while the iron is standing on its heel.
Dry ironing: When not pressing steam buttons, the iron will be in dry mode.
8
Using the spray mist. Pre-damp fabrics by pressing the spray button several times to release a fine mist; ensure the tank is
at least half full.
9
Steam hanging items. The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of 10-20 cm
and press the steam jet button.
6
. Power cord
J
. Flush Clean button
K
. Soft Water Activator, replaceable
L
. Water tank with max level indicator
M
. Cord wrap facility
N
. RESILIUM anodized ski-sloped soleplate
O
. Water fill & Water Softener System cover
P
. Iron heel
Q
. Steam button lock
R
www.aeg.com
Tabla de contenido
loading

Tabla de contenido