Balancing The Machine - Stihl FS-KM Manual De Instrucciones

Practice quickly detaching the power
tool from the carabiner as described
under "Detaching Machine from
Harness".
If you are using a shoulder strap:
Practice slipping the strap off your
shoulder.
If you are using a full harness: Practice
quickly opening the locking plate and
slipping the harness straps off your
shoulders.
FS-KM

Balancing the Machine

Balancing the Machine
The unit is balanced differently
depending on the cutting attachment
used.
Proceed as follows until the conditions
specified under "Floating positions"
have been met:
3
Loosen the screw (3).
N
Adjust the carrying ring.
N
Tighten the screw moderately.
N
Allow the unit to hang freely. N
Check the position obtained.
N
Floating positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
should just touch the ground.
N
B
Circular saw blades (B)
should "hover" about 20 cm (8 in)
N
above the ground.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
English
A
21