Tabla De Contenido - Stihl FS-KM Manual De Instrucciones

Contents
KombiSystem
Guide to Using this Manual
Safety Precautions and Working
Techniques
Approved KombiEngines
Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness
Mounting the KombiTool
Mounting the Deflector
Mounting the Cutting Attachment
Fitting the Harness
Balancing the Machine
Starting / Stopping the Engine
Transporting the Unit
Storing the Machine
Sharpening Metal Cutting Blades
Maintaining the Mowing Head
Maintenance and Care
Main Parts
Specifications
Maintenance and Repairs
Disposal
Trademarks
{
FS-KM
2
2
3
13
14
16
16
17
20
21
22
22
24
24
25
26
27
28
29
29
29
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Allow only persons who fully understand
the manuals of the KombiEngine and
trimmer / brushcutter / clearing saw
KombiTool to operate this power tool
combination.
To receive maximum performance and
satisfaction from your STIHL
KombiTool, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your
KombiTool. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in the
two manuals.
WARNING
Because a KombiEngine equipped with
a trimmer / brushcutter / clearing saw
has a high-speed cutting attachment
some special safety precautions must
be observed to reduce the risk of
personal injury. Careless or improper
use may cause serious or even fatal
injury.
Make sure your unit is equipped with the
proper deflector, handle and harness for
the type of cutting attachment being
used. Always wear proper eye
protection.
English
1