Storing The Machine; Replacing The Depth Wheel; Replacing The Skirt - Stihl FCS-KM Manual De Instrucciones

English

Storing the Machine

For periods of 3 months or longer
Remove, clean and inspect the
N
cutting blade.
If the KombiTool is removed from
N
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
Store the machine in a dry, high or
N
locked location – out of the reach of
children and other unauthorized
persons.
14

Replacing the Depth Wheel

Have the worn wheel replaced by a
specialist dealer. STIHL recommends
that maintenance and repair work be
carried out only by authorized STIHL
dealers.
Wheel
2
End of screw thread (1) is deformed
N
so that the wingnut (2) cannot be
lost
The wingnut can only be unscrewed
from the screw with lots of force. If the
parts are joined again after this, the
function of the "filler cap retainer" is no
longer assured. In this case, have the
screw and wingnut replaced with new
ones by a specialist dealer.

Replacing the Skirt

Removing the skirt
1
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
N
segment (6) and out of the gap (5) in
the deflector
5
4
1
2
6
3
FCS-KM