SYNCHRO START CD RECORDING
1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN 9 / to open the cassettte holder.
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the
CD player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN 9 /.
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH control
5 or 6 to find your passage.
2. Press PLAY•PAUSE 2; to put the CD player on pause at the
selected passage.
– Recording will begin from this exact point in the track when
you press RECORD 0.
RECORDING FROM THE RADIO
1. Set the source selector to TUNER.
2. Tune to the desired radio station (see RADIO RECEPTION).
3. Press STOP•OPEN 9 / to open the cassettte holder .
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /.
AZ 2010 /00
11
page
RECORDING
11