Dell 1708FP Guía De Información Del Producto página 21

SAFETY: If Your Device Gets Wet
CAUTION:
Before you begin any of the procedures in this section, see the SAFETY: General Safety section of this document.
CAUTION:
Perform this procedure only after you are certain that it is safe to do so. If the computer is connected
to an electrical outlet, turn off the AC power at the circuit breaker, if possible, before attempting to remove the
power cables from the electrical outlet. Use the utmost caution when removing wet cables from a live power
source.
1
Disconnect the AC adapter from the electrical outlet, and then, if possible, disconnect the AC adapter from the device.
2
Turn off any attached external devices, then disconnect them from their power sources, and then from the device. 3
For Portables : Remove the main battery from the battery bay, and if necessary, the second battery from the module bay.
Wipe off the batteries and put them in a safer place to dry.
4
Contact Dell support (see your User's Guide or Owner's Manual for the appropriate contact information).
NOTE:
See the Limited Warranties and Return Policy section of this document or separate paper warranty document that
shipped with your monitor or computer for information on your warranty coverage.
SAFETY: If You Drop or Damage Your Computer or Monitor
CAUTION:
Before you begin any of the procedures in this section, see the SAFETY: General Safety and Power Safety sections
of this document.
CAUTION:
If any internal components can be seen through damaged portions, or if smoke or unusual odors are detected,
disconnect the device from the electrical outlet and contact Dell support. See your User's Guide or Owner's Manual for the
appropriate contact information.
1
Save and close any open files, exit any open programs, and shut down the computer.
2
Disconnect the computer or monitor AC adapter from the electrical outlet, and then, if possible, disconnect the AC adapter
from the computer or monitor.
3
Turn off any attached external devices, then disconnect them from their power sources, and then from the computer.
4
If provided, remove and then reinstall the battery. If not battery powered, connect the device to the electrical outlet.
5
Turn on the device.
If the device does not start, or if and smoke or unusual odors are detected, or if you cannot identify the damaged components,
contact Dell (see your User's Guide or Owner's Manual for the appropriate contact information).
NOTE:
See the Limited Warranties and Return Policy section of this document or separate paper warranty document that
shipped with your monitor or computer for information on your warranty coverage.
CAUTION: Monitor Safety Instructions
Review the sections on General Safety Instructions and Power Safety in this document.
Read and follow these instructions when connecting and using your computer monitor:
CAUTION:
Use of controls, adjustments, or procedures other than those specified in this documentation may result in
exposure to shock, electrical hazards, and/or mechanical hazards.
• Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE:
This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically
accept any AC input voltage according to the ranges defined in the "Electrical Specifications" section in the User's Guide
Product Information Guide
.
21