LIFT CORPORATION Sht. 8 of 16 DSG#
ADJUSTING FOOT GUARD SWITCH MECHANISM - Continued
NOTE: The bracket angle must be increased to more than 30° if two clicks cannot
be heard during the operation test.
4. Adjust bracket (FIG. 8-2) to more than 30°
until two clicks can be heard during opera-
tion test by turning adjustment bolt (FIG.
8-2) COUNTER-CLOCKWISE.
5. Loosen set screw (FIG. 8-3). Then, rotate
roller wheel until it rests on the bracket
(FIG. 8-3). Tighten set screw.
BRACKET
ADJUSTMENT
BOLT
© MAXON Lift Corp. 2018
+30°
FIG. 8-2
M-16-01
Rev. A Date: 08/23/18
SET
SCREW
FIG. 8-3
ADJUSTMENT
ADJUSTMENT
BOLT
BOLT
ADJUSTMENT POINTS
FIG. 8-1
ROLLER
WHEEL
BRACKET