Idiomas disponibles
Idiomas disponibles
LIFT CORPORATION Sht. 4 of 16 DSG#
5. Connect 8-socket plug on the foot
guard switch tee to the wiring har-
ness extension cable (FIG. 4-1).
Then, connect 8-pin connector on
the tee to control switch cable in the
RH column (FIG. 4-1). Tighten con-
nectors securely.
CONTROL
SWITCH CABLE
6. Connect the 2-pin connector on the
foot guard switch tee cable to the
2-socket connector on the foot guard
switch cable as shown in FIG. 4-3.
FOOT GUARD SWITCH
CABLE
2-SOCKET
CONNECTOR
© MAXON Lift Corp. 2018
8-PIN
CONNECTOR
CONNECTING TEE TO EXTENSION CABLE
VIEW BEHIND REAR SILL
FIG. 4-3
M-16-01
WIRING HARNESS
EXTENSION CABLE
8-SOCKET
PLUG
FIG. 4-1
FOOT GUARD
SWITCH TEE
CABLE
2-PIN
CONNECTOR
Rev. A Date: 08/23/18
FOOT GUARD
SWITCH TEE
CABLE
BMR FRONT VIEW
FIG. 4-2
