Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Bicycle holder, roof mounted
en-GB
Installing on 20 mm T-track rail
– Thread the shorter T-screw (35 mm)
through the rear hole of the bicycle
holder's rear bracket and tighten the
tensioner arm a few turns.
– Thread the longer T-screws (61 mm)
into the front brackets and tighten the
tensioner arm a few turns.
14
– Adjust the position of the rear mounting
so that it fits the distance between the
load carriers.
– Lift the bicycle holder onto the roof and
align the mounting screws in the load
carrier T-track.
Tabla de contenido
